Gaming Power Supply Design Features

Gaming power supply designs are characterised by stability and efficiency, as well as high performance and quality. Compared to other fields, the gaming market is unique in that gaming hardware is becoming more and more powerful and gaming takes up more and more system resources. Therefore, gaming power supplies need to provide higher power and more stable current to meet the demands of gaming hardware. Firstly, the gaming power supply needs to provide stable current and voltage to ensure that the gaming hardware works stably. Secondly, gaming power supplies need to provide high conversion efficiency to reduce energy waste and improve energy efficiency. For example, the Boluo Xurong Electronics Co., Ltd. 1000PG5 power supply utilises all-Japanese capacitors and a high-current single +12V design to withstand power offsets of up to 3x the GPU power and 2x the total power, and is set at 70% low load efficiency to ensure stability under high load conditions. In addition, gaming power supplies need to have good thermal performance to avoid hardware damage due to overheating. For example, the Boluo Xurong Electronics Co., Ltd.1000PG5 power supply features an innovative silent design with a high-performance hydrodynamic bearing fan combined with oil-film vibration damping technology, which dramatically reduces noise and increases service life by more than two times. Finally, gaming power supplies need to have good compatibility to adapt to different gaming hardware. For example, the Boluo Xurong Electronics Co., Ltd.1000PG5 power supply complies with the new generation IntelATX30 standard and is compatible with a wide range of mainstream gaming hardware. In conclusion, the design features of gaming power supply are stability, high efficiency, good heat dissipation and compatibility. These features ensure that gaming hardware works stably, improves the gaming experience, and extends the service life of the gaming hardware.

11 October-2024

Gaming gamers look over and talk about buying a gaming power supply

The purchase of gaming power supply is an important part of ensuring the stable operation of computer hardware, therefore, this article will introduce the selection criteria of gaming power supply for gaming players. 1. Power: The most basic power of the gaming power supply should be at least 1.5 times more than the total power required by the system hardware devices. For ordinary gaming games, such as League of Legends and Overwatch, a gaming power supply rated at 500W-600W is sufficient. For large games, such as Fortnite and Survival of the Jedi, it is recommended to choose a power supply with a power of 800W or more. 2. Certification: Choose a power supply that has passed the 80PLUS certification, which is an international power certification standard that ensures the power supply's conversion efficiency and energy efficiency. 3. Heat dissipation: the thermal performance of the game power supply is very important, because the power supply will generate a lot of heat in the process of operation, if the heat dissipation is poor, it may lead to overheating of the power supply, affecting the stability and life of the power supply. 4. Cables: Choosing a gaming power supply with abundant cables can facilitate players to expand and upgrade their hardware devices. 5. Price: The price of a gaming power supply varies depending on brand, power, certification and other factors. Generally speaking, the higher the price, the better the performance and quality of the power supply will be. 6. After-sales service: choosing a brand of gaming power supply with perfect after-sales service will allow you to get a timely solution when there are problems with the power supply. The above are a few aspects that gaming gamers need to consider when choosing a gaming power supply. I hope this article can provide some reference for gaming players and help you choose the right gaming power supply for yourself.

25 September-2024

Key Features of ATX Power Supplies

ATX power supplies are a very important part of modern computers and home appliances, and their main function is to provide stable DC power to the equipment.ATX power supplies are manufactured by major brands such as Great Wall, Aircastle, and All Han, and are also available in a range of energy efficiency ratings such as White, Bronze, Silver, Gold, Platinum, Titanium, etc. The ATX power supply is made up of an AC input circuit, main power supply, auxiliary power supply, power-on signal circuit, and other parts. ATX power supplies consist of an AC input circuit, main power supply, auxiliary power supply, power-on signal circuit and other components. The AC input circuit is responsible for converting utility power into stable DC power to supply the mainframe section. The main power supply uses a switching converter to convert AC to DC and provides various voltage outputs such as +3V, +5V, +12V, +33V, etc. to meet the needs of different devices. Among them, +3V is mainly used to drive chips on the motherboard, +5V is mainly used to drive hard discs, optical drives and other devices, +12V is mainly used to drive CPUs, graphics cards and other devices, and +33V is mainly used to drive high-power devices. In addition, the ATX power supply also has a soft boot function, that is, when the computer is turned off, the power supply can be turned on by shorting the green and black wires of the ATX power supply plug, thus realising the soft boot of the computer. The output terminals of the ATX power supply include +3V, +5SB and PS-ON, where +5SB is the standby voltage used to maintain the basic operation of the computer, and PS-ON is the power-on signal used to control the power on and off. Common failures of ATX power supplies include blown switching power supply fuses, no output and 300V DC voltage from the power supply, and abnormal auxiliary power supplies. When assembling a computer, you need to choose the right size power supply according to the case size and pay attention to the energy efficiency rating of the power supply. Overall, ATX power supplies are an integral part of modern computers and home appliances, and their main function is to provide stable DC power to the equipment with a soft boot function.

10 September-2024

Basic requirements for choosing a gaming power supply

The basic requirements for choosing a gaming power supply include: 1. Power rating: the power rating of the gaming power supply should be large enough to meet the demands of the gaming device. 2. Certification: The gaming power supply needs to pass the mandatory domestic 3C certification to ensure its safety. 3. Modular cables: Gaming power supplies need to be equipped with fully modular cables so that users can choose and install the cables according to their needs. 4. Adaptable chassis size: Gaming power supplies need to be adapted to different chassis to ensure that they can be properly installed and used. 5. Brand: Choose a well-known brand of gaming power supply to ensure its quality and after-sales service. 6. Noise: Gaming power supplies need to have a silent design to ensure that they do not interfere with the gaming experience. 7. Price: The price of the gaming power supply needs to be reasonable to ensure its cost-effectiveness. 8.Adequate +12V voltage: The gaming power supply needs to have sufficient +12V voltage output to ensure that the gaming device can operate normally. 9. EMI filter circuit: the game power supply needs to have EMI filter circuit to ensure that it can effectively filter out electromagnetic interference. 10. Humanised design: the game power supply needs to have a humanised design, for example, power switch, power indicator, etc., to facilitate the use of users.

27 August-2024

A guide to using the keyboard and mouse together

Keyboard and mouse as our daily work and game entertainment important equipment, its correct collocation use can greatly improve the efficiency of work and game as well as comfort. First of all, when choosing a keyboard, we need to take into account our own needs and habits of use. If you are a gamer, then a mechanical keyboard may be more suitable for you, as it can provide stronger feedback and faster response speed. If you are an office user, then a thin and light keyboard may be more suitable for you as it can provide better portability and comfort. Secondly, when choosing a mouse, we need to consider our usage habits and hand size. If you are a gamer, then a high-precision mouse may be more suitable for you as it can provide more accurate positioning and faster response time. If you are an office user, then a comfortable mouse may be more suitable for you as it can provide better hand support and comfort for extended use. Finally, when using a keyboard and mouse, we need to pay attention to some basic operating and usage skills. For example, we need to maintain proper sitting and hand posture to avoid hand fatigue and physical discomfort. We need to learn proper mouse operation, including moving, clicking, double-clicking, right-clicking and dragging, etc., in order to improve the efficiency of our work and games. We need to learn the correct keyboard operation, including typing, copying, pasting, deleting, etc. to improve the efficiency of work and game. In conclusion, the matching use of keyboard and mouse is very important, and the correct matching use can improve our working and gaming efficiency, as well as our comfort and health.

15 August-2024